SZTJJ.com Brief Introduction
Products
Neutral Barium Dinonyl Naphthalene Sulfonate (T705A)
T701
T702
DINONYLNAPHTHALENE DISULFONIC ACID(DNNDSA)
  Contact
  You can have a telephone to:
Telephone 86+0512 65393152
  86+0512 65395468
  13906203567
Fax 86+0512 65395468
E-MAIL  zhang_jing_bo@hotmail.com
  sales@sztjj.com
Address China,Jiangsu Province,Suzhou, Hushuguan,Baofeng Village
 
 
Neutral Barium Dinonyl Naphthalene Sulfonate (T705A)

 

Ⅰ. Property
   The neutral barium dinonylnaphthalene sulfonate (T705A) is a kind of good rust-preventive agent and emulsion breaker. Since its chemical structure is different to that of basic barium dinonylnaphthalene sulfonate (T705). Its basic value is less than that of T705, and its neutralization with some acid additives in oil products is lower, too. In preparing composite agent, T705A will not produce precipitation.


Ⅱ. Use

    

1. As emulsion breaker and rust-preventive agent in abrasion-resistant hydraulic pressure oil.
2. Used in industrial lubricating agents working in moist environment, such as paper machine oil, rock drill oil, turbine oil, cycle stock and so on.
3. As rust-preventive agent in lubricating grease.

 

Ⅲ. Quality Index and Test Method

 
Item Quality index  Test method
T705A
First-grade Qualified-grade
 
Appearance
Brown transparent
Visous
Liquid
Brown
viscous
liquid
 Visual test ①
Density (20℃) g/cm ≥1.0  GB/T2540-1981
Flashing point (open), ℃ ≥165  GB/T3536-1983
Water content % ≤0.10 GB/T260-1977
Machinery impurity % ≤0.10 ≤0.15 GB/T511-1988
Barium content % ≥6.5  GB/T0225-1992
Acid value,mgKOH/g ≤1.0 ≤1.5 GB/T264-1983
Emulsion resistance (40-37-3),min ≤15 ≤20  GB/T7305-1987
Total basic value,mgKOH/g 35-55  GB/T7304-2000
Moist box,
class
96h A -  GB/T2361-1992
72h - A
Fofim reducing ability
(foam tendency/ foam
stability)
24℃ ≤50/0 ≤100/0   GB/T12579-1990
93℃
24℃
Oil solubihty Qualified Visual test ②
Experiment methods ①In a glass test-tube of diameter 30mm-40mm and height 120mm-130mm, add test sample to 2/3 height and observe from the tube side in greenhouse.
 ②Add 150# neutral oil (rubber industrial solvent oil for T705) to a beaker, add in 5% sample and dissolve it fully. Put it aside for 24 hours. If the solution has no white precipitation and suspension,it's qualified.
 
 
 
©2004 SUZHOU XUSHUGUAN CHEMICAL ADDITIVE PLANT.